Product Details:
Minimum Order Quantity | 4 Set |
Loom Dimension | 12 x 6 x 5 feet (L x W x H) |
Power | 2 HP |
Usage/Application | Weaving |
Material | Mild Steel |
Automation Grade | Automatic |
Voltage | 2 HP |
Beam Flange Diameter | 18 inch |
Weft Selection | Mechanical or Electronic |
Brand | ALT |
Model Number | RL-03 |
Reed Space | 150 to 300 cm |
Width Reduction | 4 to 20 inch |
Filling Insertion Rate | 275 mtr/min |
Shedding Motion | Tappet / Dobby / Jacquard |
Main Drive | 6 pole AC motor with electromagnetic break |
OSCARWIN WEAVING ENGINEERING
Specification :REED SPACE : 150 cm to 300 cm (60" to 120")
WIDTH REDUCTION : Minimum 4" & Maximum 20" PERFORMANCE : Filling insertion rate up to 275 m/min YARN RANGE : Spun Yarn : Ne 8.0 to Ne 120 | Filament yarns : 20 den up to 2000 den
FILLING SELECTION _ : Pick and pick selection by mechanical up to 8 colour mechanically controlled by Dobby / Jacquard
SHEDDING MOTION $: Tappet / Dobby / Jacquard
LET-OFF MOTION : Mechanical & Electrical semi positive let-off. | Warp beam dia: up to 600 mm | Back rest : Double back rest rolls
STOP MOTION : Warp : infrared Sensor | Weft : Piezo Electronic Sensor
CUTTER : Weft Cutter : Mechanical Standard (M.S.) | Selvedge Cutter : Mechanical Standard CLOTH TAKE UP : 7 Wheel with 5 Polls | Cloth Roll Dia : up to 400 mm
MAIN DRIVE : 6-Pole ac motor with electromagnetic break
LUBRICATION : minimal manual lubrication points and remaining all friction points are fitted with self-
lubrication sealed bearings.
Important Points for Increase Rapier Loom Machine Life :
Need electric earthing for rapier machine separately. e It's compulsory to machine cleaning, oiling / greasing every week. Machine foundation must be required with chemical.
Additional Information:
Product Details:
Minimum Order Quantity | 2 Unit |
Loom Dimension | 24 x 10 x 22 feet (L x W x H) |
Power | 6 kW |
Usage/Application | Textile Industry |
Material | Mild Steel |
Automation Grade | Automatic |
Beam Flange Diameter | 800mm |
Weft Selection | Electronic |
Brand | SMIT |
Model Number | GS980 |
Product Details:
Minimum Order Quantity | 4 Set |
Number Of Hook | 468,576,640,672,704,768,864,960,1056,1152,1248,1344,1440,1536,2432,2560,2688 |
Loom Dimension | 5*5*2.5 FT |
Power | 1 HP |
Usage/Application | Weaving |
Material | Mild Steel |
Machine Speed | 375 RPM |
Suitable For | Rapier,High Speed Rapier |
No. Of Cylinder And Lift | Double Lift |
Drive Type | Chain / Belt Drive |
Frame Material | Mild Steel |
Model Name/Number | EJ-02 |
Type | Module Type M5 |
Brand | ALT |
Automation Grade | Electronic |
I Deal In | New Only |
OSCARWIN WEAVING ENGINEERING
Specification : SS NORMAL HOOKS :468, 576, 640, 672, 704, 768, 864, 960, 1056, 1152, 1248, 1344, 1440, 1536, 2432, 2560, 2688
HOOKS : Moudle Type M5 FRAME STRUCTURE : Mild Steel
LIFT : Double Lift
DRIVE : Through Chain / Belt Drive
SPEED : Up to 375 RPM
HEIGHT : Low Height (Compilable to install in lower height shed)
OPERATION : Simple to operate and too easy to adopt.
HANDLING : Easy to hand and remove harness
LUBRICATION : No need of lubriction
MAINTENANCE : Lowest maintenance due to bearings (Heavy duty and long lasting self lubricating
sealed bearings) at all rotating components.
Important Points for Increase Electronic Jacquard Machine Life:
Need chemical earthing for Electronic Jacquard machine.
It's compulsory to install Stabilizer / MCB for Jacquard.
Need working structure and stairs for Jacquard maintenance. It's compulsory to clean Jacquard by using blower every week.
Additional Information:
Product Details:
Minimum Order Quantity | 4 Set |
Loom Dimension | 12 x 6 x 5 (L x W x H) |
Power | 2 HP |
Usage/Application | Weaving |
Material | Mild Steel |
Automation Grade | Automatic |
Machine Speed | 200 RPM |
Voltage | 3 HP |
Beam Flange Diameter | 18 Inch |
Color | Green |
Weft Selection | Mechanical or Electronic |
Brand | ALT |
Reed Space | 150 to 300 Cm |
The Oscarwin weaving Engineering Rapier loom has been designed with a very solid structure which permits to weave without vibration at high speeds. The machine has a capacity to weave light as well as medium to heavy fabrics. The machine has a capacity to weave light as well as medium to heavy fabrics. The machine is powered by a 2 H.P. 3-phase electric motor combined with Electro Magnetic Brake. The weft insertion of Eight Colours. Double guide floating gripper does not permit the lower warp shed to make contact with gripper or tape, giving an excellent warp run for sensitive yarns and minimize the warp breakages.
Specification of Rapier Loom Machine
Reed Space(inch) |
60 inch -120 inch |
Working Speed |
160-200 RPM |
Motor power |
2.Hp |
Shedding Device |
Mechanical or Electronic Dobby, 20 Shaft |
Structure |
Case Structure with oil lubrication |
Feeder |
Electronic feeder |
Color Selection |
6 color, mechanical color selector |
Heald Frame |
16 pcs |
Roll Up |
Positive Continuous Mechanical take up |
Run in Warp |
Positive Continuous Mechanical Let-off |
Warp Stop motion |
Six rows electronic device, Auto Stop Motion |
Beam Pipe |
450mm Beam 1 set with machine / 1 set Cloth Roll |
Control System |
Advance micro computer LCD Control panel |
Drop pin Stand |
1 set |
Leno Stand |
20 cones – 2 set |
Infrared light |
1 set |
Additional Information:
Product Details:
Minimum Order Quantity | 4 Set |
Power | 2 Hp |
Automation Grade | Semi-Automatic |
Loom Dimension | 12 x 6 x 5 (L x W x H) |
Machine Speed | 200 RPM |
Beam Flange Diameter | 18" |
Design Speed | 250 RPM |
The Oscarwin weaving Engineering Rapier loom has been designed with a very solid structure which permits to weave without vibration at high speeds. The machine has a capacity to weave light as well as medium to heavy fabrics. The machine has a capacity to weave light as well as medium to heavy fabrics. The machine is powered by a 2 H.P. 3-phase electric motor combined with Electro Magnetic Brake. The weft insertion of Eight Colours. Double guide floating gripper does not permit the lower warp shed to make contact with gripper or tape, giving an excellent warp run for sensitive yarns and minimize the warp breakages.
Specification of Rapier Loom Machine
Reed Space(inch) |
60 inch -120 inch |
Working Speed |
160-200 RPM |
Motor power |
2.Hp |
Shedding Device |
Mechanical or Electronic Dobby, 20 Shaft |
Structure |
Case Structure with oil lubrication |
Feeder |
Electronic feeder |
Color Selection |
6 color, mechanical color selector |
Heald Frame |
16 pcs |
Roll Up |
Positive Continuous Mechanical take up |
Run in Warp |
Positive Continuous Mechanical Let-off |
Warp Stop motion |
Six rows electronic device, Auto Stop Motion |
Beam Pipe |
450mm Beam 1 set with machine / 1 set Cloth Roll |
Control System |
Advance micro computer LCD Control panel |
Drop pin Stand |
1 set |
Leno Stand |
20 cones – 2 set |
Infrared light |
1 set |
Additional Information:
Product Details:
Minimum Order Quantity | 2 Set |
Model Name/Number | OCR-250 |
Power | 2 HP |
Loom Dimension | 12 x 6 x 5 (LxWxH) |
Number Of Hook | 672 |
Usage/Application | Weaving |
Material | Mild Steel |
Automation Grade | Automatic |
Brand | ALT |
Machine Speed | 200 RPM |
Input Frequency | 415 |
Phase | 3 PHASE |
Power Source | 2 HP |
Voltage | 380 |
OSCARWIN WEAVING ENGINEERING
Specification : REED SPACE : 150 cm to 300 cm (60" to 120")
WIDTH REDUCTION : Minimum 4" & Maximum 20" PERFORMANCE : Filling insertion rate up to 275 m/min YARN RANGE : Spun Yarn : Ne 8.0 to Ne 120 | Filament yarns : 20 den up to 2000 den
FILLING SELECTION _ : Pick and pick selection by mechanical up to 8 colour mechanically controlled by Dobby / Jacquard
SHEDDING MOTION $: Tappet / Dobby / Jacquard
LET-OFF MOTION : Mechanical & Electrical semi positive let-off. | Warp beam dia: up to 600 mm | Back rest : Double back rest rolls
STOP MOTION : Warp : infrared Sensor | Weft : Piezo Electronic Sensor
CUTTER : Weft Cutter : Mechanical Standard (M.S.) | Selvedge Cutter : Mechanical Standard CLOTH TAKE UP : 7 Wheel with 5 Polls | Cloth Roll Dia : up to 400 mm
MAIN DRIVE : 6-Pole ac motor with electromagnetic break
LUBRICATION : minimal manual lubrication points and remaining all friction points are fitted with self-
lubrication sealed bearings.
Important Points for Increase Rapier Loom Machine Life :
Need electric earthing for rapier machine separately. e It's compulsory to machine cleaning, oiling / greasing every week. Machine foundation must be required with chemical.
Additional Information:
3.3/5
Rated by 12 Users